Canon-imageRUNNER-3025N E743 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025N E743 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025N E743 0000 Error Code
E743 0000
Description :
There is an error in the DDI communication.
Causes :
An SCI error has occurred. The received data is faulty. A reception timeout condition has occurred. An SEQ timeout error has occurred.
Solutions :
Disconnect and then connect the flexible cable used to connect the reader unit and the printer unit.
Replace the following as necessary: flexible cable, reader controller PCB, main controller PCB.
If you’re looking at this document and have experience with this error and would wish to make a contribution make sure you leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have information about the trouble then I will reply.
Please remember, not every error is absolutely the same. What corrects the malfunction one time might not exactly resolve it the next occasion. While the data in this text hails from the service manual and oftentimes ought to get your piece of equipment up and running, from time to time other things could possibly be in play.
