Canon-imageRUNNER-3025 E007 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E007 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E007 0000 Error Code
E007 0000
Description :
The rotation of the fixing film is faulty.
Causes :
While the fixing motor is rotating, the marker signal is not detected for 6 sec with the reading of the main thermistor indicating 100 deg C or more.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 3025 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3025 E000, E001, E002, E003, Error Code Reset
If you are reading this document and have information about this error and would like to share make sure you leave a comment below. Or, if you have read this article and have more questions then ask. If I have experience with the trouble then I will reply.
Keep in mind, not every error is simply identical. What corrects the situation one occasion might not exactly eliminate it the next occasion. While the specifics in this document is inspired by the service manual and most often should get your piece of equipment ready to go, from time to time other reasons could possibly be in play.
