Canon-imageRUNNER-2830 E064 0004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E064 0004 Error Code
E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.
If you are looking over this document and have exposure to this fault and desire to make a contribution please be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the issue then I will answer.
Don’t forget, not every error is absolutely identical. What fixes the trouble one occasion might not get rid of it the next occasion. While the advice in this posting comes from the service manual and most often ought to get your piece of equipment ready to go, at times additional variables can be in play.
