Canon-imageRUNNER-2830 E020 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E020 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E020 0000 Error Code
E020 0000
Description :
The path between the sub hopper and the developing assembly is clogged with toner.
Causes :
The developing assembly toner sensor detects the absence of toner, while the sub hopper toner sensor detects the presence of toner.
With the developing clutch turned on, the hopper feed screw motor is rotated for 1 sec intermittently 194 times; still, the developing assembly toner sensor does not detect the presence of toner.
Solutions :
Replace the developing assembly toner sensor.
Replace the sub hopper toner sensor.
Replace the DC control PCB.
If you are looking over this document and have experience with this error message and desire to make a contribution please make sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have experience with the problem then I will reply.
Do not forget, not every error is totally identical. What fixes the problem one time may possibly not solve it the next time. While the tips in this posting is obtained from the service manual and oftentimes ought to get your piece of equipment up and running, at times other factors might be in play.
