Canon-imageRUNNER-2830 E007 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E007 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E007 0000 Error Code
E007 0000
Description :
The rotation of the fixing film is faulty.
Causes :
While the fixing motor is rotating, the marker signal is not detected for 6 sec with the reading of the main thermistor indicating 100 deg C or more.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2830 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2830 E000, E001, E002, E003, Error Code Reset
If you are looking over this blog post and have information about this error message and would wish to contribute make sure you leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have experience with the difficulty then I will respond.
Do not forget, not every error is simply the same. What remedies the difficulty one time may possibly not take care of it the next time. While the details in this post derives from the service manual and most likely ought to get your product working, sometimes other elements can be in play.
