Canon-imageRUNNER-2270 E191 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E191 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E191 0000 Error Code
E191 0000
Description :
There is an error in the communication with the high-voltage power supply.
Causes :
The data transmission/reception does not end normally 500 msec after the most recent transmission/reception of data ended normally.
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are looking at this post and have knowledge about this error message and wish to share you should leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have exposure to the issue then I will answer back.
Bear in mind, not every error is precisely alike. What corrects the malfunction one occasion will possibly not resolve it the next occasion. While the data in this document is obtained from the service manual and most often should get your machine functioning, at times other causes can be in play.
