Canon imageCLASS MF6180dw E100 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS MF6180dw E100 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS MF6180dw E100 0000 Error Code
E100 0000
Description :
Laser Scanner Assembly error
Causes :
At the Laser Scanner Unit, BD cycle was not within the specified range.
Solutions :
1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit.
2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit.
3. Replace the Laser Scanner Unit.
Realize, not every error is totally the same. What treats the issue one time may possibly not get rid of it the next time. While the information in this posting is inspired by the service manual and most often should get your device up and running, occasionally other elements may be in play.
If you are looking over this write-up and have exposure to this error message and want to make a contribution make sure you leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will answer.
