Canon imageCLASS MF6160dw E100 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS MF6160dw E100 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS MF6160dw E100 0000 Error Code
E100 0000
Description :
Laser Scanner Assembly error
Causes :
At the Laser Scanner Unit, BD cycle was not within the specified range.
Solutions :
1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit.
2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit.
3. Replace the Laser Scanner Unit.
Make sure you remember, not every error is entirely the same. What remedies the complication one occasion might not fix it the next time. While the material in this blog derives from the service manual and oftentimes ought to get your device functioning, at times other variables might be in play.
If you’re looking at this short article and have experience with this error message and desire to contribute please be sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have experience with the situation then I will reply.
