Canon imageCLASS MF5960dn E744 7000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS MF5960dn E744 7000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS MF5960dn E744 7000 Error Code
E744 7000
Description :
Main Controller PCB error
Causes :
An error in the microcomputer which retains fax job information of the Main Controller PCB.
Solutions :
1. Install the firmware of BKUP.
2. Install the set of the controller firmware.
3. Replace the Main Controller PCB.
Take into account, not every error is precisely the same. What corrects the condition one time might not eliminate it the next time. While the material in this post hails from the service manual and generally ought to get your piece of equipment operating, now and again other things could possibly be in play.
If you are looking over this blog post and have exposure to this malfunction and would wish to share please be sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have information about the issue then I will answer.
