Canon imageCLASS MF5960dn E736 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS MF5960dn E736 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS MF5960dn E736 0000 Error Code
E736 0000
Description :
Communication error with CCU/modem
Causes :
Communication error with CCU/modem.
NCU PCB type error.
Solutions :
1. Install the set of the controller firmware.
2. Replace the NCU PCB.
3. Replace the Main Controller PCB.
Remember, not every error is exactly alike. What corrects the problem one occasion might not exactly solve it the next time. While the advice in this blog is inspired by the service manual and most likely ought to get your device ready to go, now and again other factors could possibly be in play.
If you are looking over this post and have knowledge of this fault and wish to share you should leave a comment down below. Or, if you have read this article and have further questions then ask. If I have information about the problem then I will respond.
