Canon imageCLASS MF5960dn E196 2000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS MF5960dn E196 2000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS MF5960dn E196 2000 Error Code
E196 2000
Description :
Main Controller PCB reading/writing error
Causes :
Error in reading/writing of setting values storage area in the Main Controller PCB
Solutions :
1. Install the set of the controller firmware.
2. Replace the Main Controller PCB.
Remember that, not every error is entirely identical. What corrects the trouble one time may not get rid of it the next time. While the content in this write-up hails from the service manual and most often ought to get your piece of equipment operational, on occasion other factors might be in play.
If you are reading this article and have knowledge of this error and want to make a contribution please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the situation then I will reply.
