Canon imageCLASS MF5960dn E100 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS MF5960dn E100 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS MF5960dn E100 0000 Error Code
E100 0000
Description :
Laser Scanner Assembly error
Causes :
At the Laser Scanner Unit, BD cycle was not within the specified range.
Solutions :
1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit.
2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit.
3. Replace the Laser Scanner Unit.
Remember that, not every error is completely alike. What remedies the trouble one occasion may not eliminate it the next time. While the advice in this writing is taken from the service manual and usually ought to get your unit ready to go, on occasion additional circumstances can be in play.
If you are reading this blog post and have exposure to this malfunction and want to make a contribution please leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer back.
