Canon imageCLASS MF5880dn E196 2000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS MF5880dn E196 2000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS MF5880dn E196 2000 Error Code
E196 2000
Description :
Main Controller PCB reading/writing error
Causes :
Error in reading/writing of setting values storage area in the Main Controller PCB
Solutions :
1. Install the set of the controller firmware.
2. Replace the Main Controller PCB.
Do not forget, not every error is entirely alike. What remedies the trouble one time might not exactly eliminate it the next occasion. While the details in this write-up is obtained from the service manual and oftentimes should get your product ready to go, in some cases additional circumstances could possibly be in play.
If you’re reading this document and have knowledge about this malfunction and would wish to share please leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have information about the situation then I will reply.
