Canon imageCLASS MF5880dn E100 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS MF5880dn E100 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS MF5880dn E100 0000 Error Code
E100 0000
Description :
Laser Scanner Assembly error
Causes :
At the Laser Scanner Unit, BD cycle was not within the specified range.
Solutions :
1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit.
2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit.
3. Replace the Laser Scanner Unit.
Do not forget, not every error is completely the same. What treats the situation one occasion might not fix it the next occasion. While the specifics in this text is taken from the service manual and usually ought to get your equipment ready to go, occasionally other reasons could possibly be in play.
If you’re reading this page and have expertise in this error and would wish to share make sure you leave a comment below. Or, if you have read this article and have additional questions then ask. If I have information about the issue then I will answer.
