Canon imageCLASS D1370 E744 5000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1370 E744 5000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1370 E744 5000 Error Code
E744 5000
Description :
Error in the Control Panel PCB
Causes :
Error in the Control Panel PCB (microcomputer).
Solutions :
1. Check the Control Panel PCB, and install the firmware (PANEL).
2. Install the set of the controller firmware.
3. Replace the Main Controller PCB.
Remember that, not every error is completely identical. What treats the condition one occasion may possibly not remedy it the next occasion. While the advice in this post is taken from the service manual and generally ought to get your equipment working, sometimes other reasons may be in play.
If you’re reading this article and have knowledge about this fault and want to share please be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have knowledge about the problem then I will respond.
