Canon imageCLASS D1370 E100 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1370 E100 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1370 E100 0000 Error Code
E100 0000
Description :
Laser Scanner Assembly error
Causes :
At the Laser Scanner Unit, BD cycle was not within the specified range.
Solutions :
1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit.
2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit.
3. Replace the Laser Scanner Unit.
Please remember, not every error is entirely identical. What treats the difficulty one time may possibly not resolve it the next time. While the material in this text derives from the service manual and typically ought to get your unit up and running, from time to time additional circumstances may be in play.
If you’re looking over this page and have information about this malfunction and would like to contribute be sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will answer.
