Canon imageCLASS D1350 E744 4000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1350 E744 4000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1350 E744 4000 Error Code
E744 4000
Description :
Engine ID error
Causes :
Invalid engine connection was detected.
Solutions :
1. Turn OFF and then ON the main power.
2. Check the Engine Controller PCB.
3. Install the Engine Controller PCB.
4. Install the set of the controller firmware.
5. Check the model code. (When the model code and the engine code are mismatched, E744-4000 occurs.)
Make sure you remember, not every error is exactly identical. What treats the complication one time might not eliminate it the next occasion. While the guidance in this blog is obtained from the service manual and usually should get your piece of equipment operating, from time to time additional factors can be in play.
If you’re looking at this piece of content and have information about this error message and desire to contribute you should leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have information about the trouble then I will answer back.
