Canon imageCLASS D1350 E100 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1350 E100 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1350 E100 0000 Error Code
E100 0000
Description :
Laser Scanner Assembly error
Causes :
At the Laser Scanner Unit, BD cycle was not within the specified range.
Solutions :
1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit.
2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit.
3. Replace the Laser Scanner Unit.
Keep in mind, not every error is entirely alike. What corrects the malfunction one occasion will possibly not get rid of it the next time. While the material in this posting obtain from the service manual and most likely should get your unit operating, in some cases other things can be in play.
If you are reading this short article and have expertise in this error and want to share please leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the situation then I will answer.
