Canon imageCLASS D1350 E003 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1350 E003 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1350 E003 0000 Error Code
E003 0000
Description :
Abnormal low temperature of Fixing Assembly
Causes :
It was detected that the temperature of the Fixing Assembly was abnormally low.
Solutions :
1. Check the connector between the Fixing Assembly and the DC Controller PCB.
2. Replace the Fixing Assembly.
3. Replace the DC Controller PCB.
HP RM1-6405-000cn Fuser (Fixing) Unit – 120 Volt (Genuine) – $129.95
Canon imageCLASS D1350 Fuser Removal and Replacement RM1-6405-000, FM4-3436-000
Just remember, not every error is completely identical. What corrects the problem one occasion will possibly not fix it the next time. While the guidance in this short article comes from the service manual and typically should get your equipment ready to go, at times other factors could possibly be in play.
If you are reading this piece of content and have knowledge of this malfunction and would wish to contribute you should leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have experience with the trouble then I will reply.
