Canon imageCLASS D1350 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1350 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1350 E001 0000 Error Code
E001 0000
Description :
Abnormal high temperature of Fixing Assembly
Causes :
It was detected that the temperature of the Fixing Assembly was abnormally high.
Solutions :
1. Check the connector between the Fixing Assembly and the DC Controller PCB.
2. Replace the Fixing Assembly.
3. Replace the Engine Controller PCB.
HP RM1-6405-000cn Fuser (Fixing) Unit – 120 Volt (Genuine) – $129.95
Canon imageCLASS D1350 Fuser Removal and Replacement RM1-6405-000, FM4-3436-000
Just remember, not every error is absolutely the same. What fixes the issue one occasion may possibly not remedy it the next time. While the guidance in this blog post derives from the service manual and oftentimes should get your machine ready to go, sometimes additional variables may be in play.
If you are reading this piece of content and have knowledge about this problem and desire to share please be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have knowledge about the difficulty then I will answer.
