Canon imageCLASS D1320 E746 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1320 E746 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1320 E746 0000 Error Code
E746 0000
Description :
Main Controller PCB error
Causes :
Main Controller communication error occurred (other than scan).
Solutions :
1. Install the set of the controller firmware.
2. Replace the Main Controller PCB.
Do not forget, not every error is entirely the same. What fixes the malfunction one time might not solve it the next time. While the material in this write-up comes from the service manual and most often ought to get your machine ready to go, at times additional circumstances could possibly be in play.
If you are looking over this write-up and have exposure to this error message and want to make a contribution make sure you leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will answer.
