Canon imageCLASS D1320 E248 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1320 E248 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1320 E248 0001 Error Code
E248 0001
Description :
Error in access to backup data for Reader (reading error at power-on)
Causes :
The Reader-related adjustment values could not be read.
Solutions :
1. Clear the backup RAM of RCON.Execute COPIER>FUNCTION>CLEAR>RCON.
2. Enter all the values written on the service label in service mode again.
3. Turn OFF and then ON the main power.
Bear in mind, not every error is entirely alike. What corrects the complication one occasion will possibly not remedy it the next occasion. While the details in this page is taken from the service manual and normally should get your piece of equipment up and running, occasionally other causes can be in play.
If you are looking over this article and have knowledge of this problem and would like to share please leave a comment down below. Or, if you have read this article and have more questions then ask. If I have experience with the issue then I will respond.
