Canon imageCLASS D1320 E100 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1320 E100 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1320 E100 0000 Error Code
E100 0000
Description :
Laser Scanner Assembly error
Causes :
At the Laser Scanner Unit, BD cycle was not within the specified range.
Solutions :
1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit.
2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit.
3. Replace the Laser Scanner Unit.
Always remember, not every error is simply the same. What remedies the problem one time may possibly not eliminate it the next occasion. While the data in this writing is obtained from the service manual and most often ought to get your device operating, occasionally other factors can be in play.
If you are looking at this piece of content and have knowledge about this error and would like to contribute you should leave a comment down below. Or, if you have read this article and have more questions then ask. If I have knowledge about the situation then I will reply.
