Canon imageCLASS D1320 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageCLASS D1320 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageCLASS D1320 E001 0000 Error Code
E001 0000
Description :
Abnormal high temperature of Fixing Assembly
Causes :
It was detected that the temperature of the Fixing Assembly was abnormally high.
Solutions :
1. Check the connector between the Fixing Assembly and the DC Controller PCB.
2. Replace the Fixing Assembly.
3. Replace the Engine Controller PCB.
HP RM1-6405-000cn Fuser (Fixing) Unit – 120 Volt (Genuine) – $129.95
Canon imageCLASS D1320 Fuser Removal and Replacement RM1-6405-000, FM4-3436-000
Always remember, not every error is completely the same. What remedies the complication one occasion might not fix it the next occasion. While the tips in this write-up derives from the service manual and normally should get your machine operating, in some cases other elements might be in play.
If you are looking at this blog post and have knowledge about this malfunction and desire to share be sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will answer.
