Lanier 8310 PCU Drum Replacement Techniques
In this article are the detailed Lanier 8310 PCU Drum Replacement Directions. The good news is that this PCU is fairly inexpensive. Moreover, it encompasses almost all the image production steps. For that reason, your not stuck replacing a number of pieces. And thus, if you’ve an image predicament, you don’t commit a whole lot of time guessing which section is generating the problem if you don’t have a good deal of knowledge problem solving products.
These Drums are posted at within 45,000 pages. In general you might get a Replace PCU message when it is time to replace the unit.
Lanier 8310 Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU. 1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth. 2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface. 3. Store the PCU in a cool dry place. 4. Do not expose the drum to corrosive gases (ammonia, etc.). 5. Do not shake a used PCU, as this may cause toner and developer to spill out.
Lanier 8310 PCU Drum Removal Procedure
1. Open the right door.
Mention: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.
2. Open the front door.
3. Remove the toner bottle holder or THM.
;”>Important: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.
4. Detach the connector [A] and pull out the PCU [B].
;”>Pay attention: 1) After installing the all new PCU, be sure to take away the Styrofoam element and to pull off the two tags.
3) Dispose of the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.
2) The machine will routinely detect the new PCU and initialize toner initialization.
You might not have to flip off the PM Alert Message. The PM level can be arranged to 45,000. Having said that, a lot of people have switched them off at this stage or wouldn’t have them set up this low.
After carrying out PM, remove the PM counter as follows.
1. Enter SP mode 7-804.
2. Hold down the Original Type key and click the OK key (or ! key) to adjust the counter. If the reset is successful, the display screen details “Action completed.” If the reset does not work out, the screen exposes “Error!!!”
Lanier 8310 Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
