Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140-2 Call for Service
Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140-2 Call for Service Instructions
Below you will find the service manual information for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140-2 Call for Service along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140-2 Call for Service
Kyocera KM-C2525E, KM-C3225E, KM-C3232E, KM-C4035E C8140-2 Call for Service
Description :
Tray elevation motor problem (optional document finisher) The tray low limit sensor, paper retaining sensor or paper surface sensor cannot be detected to be on within 10 s since the tray elevation motor is activated.
Causes :
1. The tray elevation motor connector makes poor con- tact.
2. The tray elevation motor malfunc- tions.
3. The tray lower limit sensor/push paper sensor/surface view sensor con- nector makes poor contact.
4. Defective tray lower limit sensor/ push paper sensor/ surface view sen- sor.
5. Defective finisher main PWB.
6.
Solutions :
1. Reinsert the connector. Also check for conti- nuity within the connector cable. If none, remedy or replace the cable.
2. Replace the tray elevation motor.
3. Reinsert the connector. Also check for conti- nuity within the connector cable. If none, remedy or replace the cable.
4. Replace the sensor.
5. Replace the finisher main PWB and check for correct operation.
5.
Remember, not every error is exactly the same. What fixes the Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140-2 Call for Service one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
