Instructions for the Brother 9130, 9330, 9340 Replace Parts Fuser Unit Life Reset Procedure
After 50,000 prints and copies the machines will come up with the Brother 9130, 9330, 9340 Replace Parts Fuser Unit Reset. Typically at this time the fusing unit is shot and needs to be reset. The fusing unit is in the back of the machine and is the part that bonds the toner to the paper using heat and pressure. Below you will find instructions on how to reset this message. Also, you will find links to purchase a new fusing unit and a link at the bottom of the page for the replacement instructions.
Brother LY6753001 OEM Fuser (Fixing) Unit
–
–
–
Brother 9130, 9330, 9340 Replace Parts Fuser Unit Life Reset Instructions
Press the Fax option on the touch screen.
The Home symbol should light up on the right side.
Press and hold down the Home key for about 5 seconds until the screen showing serial number with 4 boxes is displayed.
Hold down the blank space (last rectangle box) at the bottom of the LCD until the numbers grid is displayed on the LCD.
Press the *, 2, 8, 6, 4 on the panel unit in the order. The display will show “Maintenance†and enter maintenance mode
Once in Maintenance mode, press 88. “Reset-Fuser Unit†will be displayed on the LCD.
Press SET key on the touch screen, and “Reset-Fuser unit Ok?†will be displayed.
Press SET key on the touch screen to reset the fuser counter
Press Stop key on the touch screen. Press 99 to exit maintenance mode
Click on the link below for the replacement instructions
Brother MFC 9130, 9330, 9340 Fuser Replacement LY6753001