Xerox Workcentre 3220 ADF Document Jam Error Message Troubleshooting
Below you will find advice for the Xerox Workcentre 3220 Document Jam Error Message Troubleshooting. As they age, feeding will start to decline. Typically, it starts off as intermittent jamming that leads to mor consistent document jam messages or one has to help push it to get it started. These are all signs that the feed rollers are getting worn out and need to be replaced.
These feed rollers are rated between 50,000 and 80,000 pages. Older models don’t record the life of these parts while some of the newer models you can find it in the system setup, maintenance, supply life menu structure.
Xerox Workcentre 3220 Document Jam Error Message Troubleshooting
1. Open up the Automatic Document Feeder upper cover and check out for particles as well as other items that could possibly contribute to jamming.
2. Check the feed rollers and separation pad. The same as your motor vehicle tires the feed rollers have tread built in. Once they get worn out the tread disappears and in addition they acquire a gleam to them.
3. Take a damp washcloth with h2o or alcohol and clean off the feed tires. If it starts running again then your feed rollers are likely starting to be worn down and need to be replaced. If not, then look at tire rotation as it endeavors to feed the piece of paper within. On condition that they cycle, then again, likely time for you to swap the feed tires. In case they don’t cycle, then you might surely have another predicament. A service call tends to be needed.
4. Changing the feed / pick up rollers and separation pad is usually the next step so that you can more deeply repair. Ninety five% percent of times if the paper seriously isn’t feeding, updating the feed tires ought to mend the issue.
Click on the link below for the illustrated replacement instructions
Xerox Workcentre 3220 ADF Roller Replacement Procedure
