Canon imageRUNNER 2535I E542 0005 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E542 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2535I E542 0005 Error Code
E542 0005
Description :
Causes :
The FG input cannot be detected when the Additional Tray Lift Motor (M12) has been driven for 0.1 second.
Solutions :
1.Replace the Additional Tray Clock Sensor (S23).
2.Replace the Additional Tray Lift Motor (M12)
3.Replace the Finisher Controller PCB (PCB1).
Realize, not every error is precisely alike. What fixes the condition one occasion may possibly not remedy it the next occasion. While the help and advice in this text obtain from the service manual and typically should get your equipment working, from time to time other causes could possibly be in play.
If you’re looking at this short article and have knowledge of this problem and desire to share please leave a comment below. Or, if you have read this article and have further questions then ask. If I have knowledge about the situation then I will reply.
