CopyStar CS-180 Fuser Replacement Procedure – FK-460, 302KK93041
Personally, I don’t have a lot experience with these machines so I don’t have much to say about the fusers. Below you will find the fuser replacement illustrated instructions along with a list of the common error codes associated with the fuser. These fusers are rated at 300,000 pages like most other large models.
Copystar CS180 Fuser Unit – 110 / 120 Volt (Genuine) – $169.95
from: Precision Roller
CopyStar CS-180 Fuser Related Errors
C6000 Fuser heater break
C6020 Abnormally high fuser thermistor temperature
C6050 Abnormally low fuser thermistor temperature
CopyStar CS-180 Fuser Removal Procedure
Follow the procedure below to check or replace the fuser unit.
Note : Turn the power off and unplug the power cord from the wall before performing repair. Also, the fuser is extremely hot. Therefore, you might want to wait 10 to 20 minutes before removing and avoid touching the hot roller or pressure roller.
1. Open the front cover and left cover.
2. Remove the screw and release three inserted parts and then remove the front left cover.
3. Remove the screw and two connectors and then remove the fuser unit.
4. Replace the fuser unit and refit all the removed parts.
After connecting the connector, be sure to hitch the fuser thermistor wire to both the notch position and the hook of the fuser unit.
Copystar CS180 Fuser Unit – 110 / 120 Volt (Genuine) – $169.95 Genuine Fuser Unit – 110 / 120 Volt for Copystar CS180; Fuser Assembly / Unit – Genuine Kyocera Mita Fuser Assembly |