Canon imageRUNNER 1740iF E577 8002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740iF E577 8002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740iF E577 8002 Error Code
E577 8002
Description :
Paddle Motor (M3) error
Causes :
The Paddle Motor (M3) was driven for 2 seconds, but the Paddle could not be detected by the Paddle HP Sensor (S3).
Solutions :
1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Check for open circuit of the Harness of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Replace the Finisher Controller PCB.
Just remember, not every error is entirely identical. What fixes the malfunction one occasion may not fix it the next time. While the content in this document is inspired by the service manual and usually should get your equipment operating, at times other elements might be in play.
If you are looking over this short article and have experience with this error message and would wish to make a contribution please make sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer.
