Canon-imageRUNNER-4570 E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E010 0002 Error Code
E010 0002
Description :
The rotation of the main motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you’re reading this piece of content and have experience with this fault and wish to share you should leave a comment below. Or, if you have read this article and have additional questions then ask. If I have knowledge about the trouble then I will answer back.
Try to remember, not every error is exactly identical. What treats the condition one occasion will possibly not solve it the next occasion. While the specifics in this blog is inspired by the service manual and most likely should get your piece of equipment ready to go, from time to time other things might be in play.
