Home » Canon Repair Articles » Canon-imageRUNNER-3045 E007 0000 Error Code

Canon Repair ArticlesimageRUNNER 3045

Canon-imageRUNNER-3045 E007 0000 Error Code

admin

May 12, 2017

7 Views 0

SaveSavedRemoved 0

Canon-imageRUNNER-3045 E007 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3045 E007 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Service Manual Instructions for the Canon-imageRUNNER-3045 E007 0000 Error Code

E007 0000
Description :
The rotation of the fixing film is faulty.

Causes :
While the fixing motor is rotating, the marker signal is not detected for 6 sec with the reading of the main thermistor indicating 100 deg C or more.

Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.

Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95

If you’re looking over this piece of content and have exposure to this fault and wish to share please leave a comment below. Or, if you have read this article and have further questions then ask. If I have knowledge about the issue then I will reply.

Remember, not every error is absolutely identical. What remedies the situation one occasion will possibly not get rid of it the next time. While the details in this post hails from the service manual and normally ought to get your machine operating, now and again other reasons may be in play.