Canon-imageRUNNER-3035 E730 9004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3035 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3035 E730 9004 Error Code
E730 9004
Description :
There is a PDL software error.
Causes :
There is an error in the communication (PAI) with an external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you’re looking over this document and have knowledge of this error message and desire to share be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the difficulty then I will answer back.
Remember that, not every error is exactly the same. What remedies the malfunction one time may not eliminate it the next time. While the information in this short article is inspired by the service manual and usually ought to get your device operational, on occasion additional variables might be in play.
