Canon-imageRUNNER-3030 E064 0005 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3030 E064 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3030 E064 0005 Error Code
E064 0005
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you’re looking at this piece of content and have experience with this fault and desire to share please be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will answer back.
Please remember, not every error is precisely identical. What corrects the difficulty one occasion may not resolve it the next occasion. While the ideas in this piece of content is taken from the service manual and most often ought to get your device operating, sometimes other factors could possibly be in play.
