Canon-imageRUNNER-3025 E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3025 E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3025 E110 0002 Error Code
E110 0002
Description :
The scanner motor is faulty.
Causes :
The speed lock signal indicates a deviation 10 times in sequence at intervals of 10 msec after the signal has indicated a locked state.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are reading this page and have exposure to this fault and would wish to share please make sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have information about the difficulty then I will answer back.
Make sure you remember, not every error is completely alike. What fixes the complication one time may not get rid of it the next time. While the material in this text comes from the service manual and most often should get your device operational, from time to time additional variables may be in play.
