Canon imageRUNNER ADVANCE 400iF ADF Feed Roller Kit Replacement FL3-7878, FC8-6355, FC6-2784

 

Canon imageRUNNER ADVANCE 400iF ADF Feed Roller Kit Replacement FL3-7878, FC8-6355, FC6-2784

Below you will find the Canon imageRUNNER ADVANCE 400iF ADF Feed Roller Kit Replacement instructions. Follow the instructions and get your document feeder back up and running.

With scanning being so important in today’s age, document feed rollers just don’t last like the use too. Over time you will notice more and more misfeeds where the paper fails to feed into the document feeder. Or you will start seeing more than one page feed through at a time.

Document feed rollers have tread on them just like your car tires. Over time the tread wears down and they become slick. Now the pick up roller only starts the feeding process so in most cases they stay relatively good. However, the feed roller is the one that sees the most wear and tear and that is the part that usually causes the problem.

Canon 80,000 ADF Maintenance Kit
Genuine Canon Kit
Kit Includes:
(1) Separation Pad Assembly [FL3-7878-000]
(1) Pickup Roller [FC8-6355-000]
(1) Feed Roller [FC6-2784-000]

Canon imageRUNNER ADVANCE 400iF ADF Feed Roller Kit Replacement Procedure

1. Open the ADF Upper Cover Unit 1, and remove the ADF Separation Pad 2.
• 2 Claws 3

2. Be sure to fit the spring 1 of the ADF Separation Pad into the 2 bosses 2 when
assembling.

3. While pulling the [A] part of the ADF Front Cover, release the [B] part which works as an
open/close stopper and open the ADF Upper Cover Unit 1.

4. Remove the ADF Upper Cover Unit 1.
• 1 Link 2
• 2 Shafts 3

5. Remove the Pickup Upper Cover Lower Guide 1.
• 2 Claws 2
• 3 Hooks 3

6. Remove the Pickup Roller Unit 1.
• 1 Clip 2
• 1 Bushing 3
• 1 Spring 4

7. Be sure to install the 4 flags 1 of the ADF Pickup Roller Unit under the 2 flags 2 of
the Upper Cover Unit when assembling.
• Hook the 2 edges 3 of the spring on the 2 grooves [A] when assembling.

Canon imageRUNNER ADVANCE 400iF ADF Feed Roller Kit Replacement FL3-7878, FC8-6355, FC6-2784

HOW TO REPLACE CANON IR400/IR1730 ADF FEED REPAIR KIT

Hey guys today we are going to show you: HOW TO REPLACE CANON IR400/IR1730 ADF FEED REPAIR KIT ALSO FOR THE IR1740, IR1750, ...

We will be happy to hear your thoughts

Leave a reply

Shopping cart