Savin MP 2352SP AE011128 Upper Hot Roller Replacement Procedure

 

Savin MP 2352SP AE011128 AE011128 Upper Hot Roller Replacement Instructions

Below you will find the illustrated Savin MP 2352SP AE011128 AE011128 Upper Hot Roller Replacement instuctions. Yeah, I know, these machines are getting on in age. Excuse me, I just happened to look up the instructions, saw they were pretty straight forward, and found out you can still get the parts. So, I figured what the heck.

Ghosting, indents, creases in the paper? You might have an issue with your hot roller. Toner builds up on that can cause ghosting and when pick fingers or thermistors eat away at the surface you can have other issues. Follow the instructions below to remove the fuser and check out your hot roller.

1. Savin MP 2352SP FUSING UNIT
CAUTION
Allow time for the unit to cool before doing the following procedure.
1. Release the duplex unit, if it has been installed, and open the right cover.
2. Remove the fusing unit [A] (2 screws).

2-3. Savin MP 2352SP Fuser Top Cover and Pick Fingers
1. Remove the fusing unit.
2. Remove the fusing upper cover [A] (4 screws).
3. Remove the pressure springs [B].
4. Remove the hot roller stripper bracket [C] (3 screws).

4. Savin MP 2352SP HOT ROLLER AND FUSING LAMP
1. Remove the fusing unit.
2. Remove the fusing upper cover.
3. Remove the pressure springs.
4. Remove the hot roller stripper bracket.
5. Remove the fusing lamps (4 screws) and hot roller assembly [A].
NOTE: Do not touch the surface of the fusing lamp with bare hands.
6. Replace the hot roller [B] (2 C-rings, 1 gear, 2 bushings).
Reinstallation Instructions at bottom of illustrated instructions
NOTE: 1) Apply grease (Barrierta) to the inner surface of the bushing.
2) Before installing the new hot roller, peel off 3 cm (1 inch) from both ends of the protective sheet on the new roller. After installation, remove the protective sheet.
3) Do not touch the surface of the rollers.
4) When reinstalling the fusing lamp, secure the front screws first.
5) Be careful not to damage the surface of the hot roller.

Savin MP 2352SP AE011128 Upper Hot Roller Replacement

Genuine Ricoh Hot Roller AE01-1128 AE011128 MP 2352 2852 3352 2553 3053 3553 +

$39.71  in stock
Item condition: New
Ended: Jan 19, 10:30PST
Free shipping
eBay
as of January 7, 2024 10:05 am

Ricoh AE01-1128 (AE011128) Upper Fuser Roller

$72.19  in stock
Item condition: New
Ended: Feb 5, 01:05PST
eBay
as of January 7, 2024 10:05 am

Genuine RICOH, Lanier, Savin AE01 1128 (AE011128) Hot Roller

$35.95  in stock
Item condition: New
Ended: Jan 23, 16:28PST
eBay
as of January 7, 2024 10:05 am

Genuine RICOH, Lanier, Savin AE01 1128 Hot Roller and AE02 0161 Pressure Roller

$59.95  in stock
Item condition: New
Ended: Jan 23, 17:26PST
eBay
as of January 7, 2024 10:05 am

Genuine Ricoh AE01-1128 Upper Fuser Roller

$66.44  in stock
Item condition: New
Ended: Jan 8, 03:20PST
eBay
as of January 7, 2024 10:05 am
We will be happy to hear your thoughts

Leave a reply

Shopping cart