Canon imageRUNNER 2545I E542 0005 Error Code

 

Canon imageRUNNER 2545I E542 0005 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2545I E542 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2545I E542 0005 Error Code

Service Manual Instructions for the Canon imageRUNNER 2545I E542 0005 Error Code

E542 0005
Description :

Causes :
The FG input cannot be detected when the Additional Tray Lift Motor (M12) has been driven for 0.1 second.


Solutions :
1.Replace the Additional Tray Clock Sensor (S23).
2.Replace the Additional Tray Lift Motor (M12)
3.Replace the Finisher Controller PCB (PCB1).




Note, not every error is exactly identical. What corrects the malfunction one time might not fix it the next occasion. While the info in this blog post is obtained from the service manual and usually ought to get your unit operational, occasionally additional circumstances may be in play.

If you are reading this write-up and have knowledge of this malfunction and would wish to make a contribution make sure you leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the issue then I will answer.

We will be happy to hear your thoughts

Leave a reply

Shopping cart