Canon imageRUNNER 2545I E542 0001 Error Code

 

Canon imageRUNNER 2545I E542 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2545I E542 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2545I E542 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 2545I E542 0001 Error Code

E542 0001
Description :

Causes :
The stack tray does not move within a specified time period.


Solutions :
1.Replace the Additional Tray Lift Motor (M12).
2.Replace the Finisher Controller PCB (PCB1).





Note, not every error is exactly identical. What fixes the problem one time may possibly not eliminate it the next occasion. While the content in this post derives from the service manual and oftentimes should get your equipment operating, in some cases additional factors may be in play.

If you are reading this write-up and have knowledge of this problem and wish to contribute you should leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have information about the issue then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart