Canon imageRUNNER 2545I E520 0001 Error Code

 

Canon imageRUNNER 2545I E520 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2545I E520 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2545I E520 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 2545I E520 0001 Error Code

E520 0001
Description :

Causes :
The shift roller does not leave the shift roller home position when the Shift Motor (M4) has been driven for 1.2 seconds.


Solutions :
1.Replace the Shift Roller HP Sensor (S2).
2.Replace the Shift Motor (M4).
3.Replace the Finisher Controller PCB (PCB1).




Note, not every error is precisely alike. What treats the issue one time might not fix it the next time. While the info in this page originates from the service manual and generally should get your piece of equipment up and running, at times other variables may be in play.

If you’re looking at this article and have expertise in this problem and would wish to contribute please leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart