Canon imageRUNNER 2545I E225 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E225 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E225 0000 Error Code
E225 0000
Description :
Causes :
The light intensity of the CCD during shading is under the specified level.
Solutions :
1.Disconnect and then connect the flexible cable.
2.Replace the flexible cable.
3.Replace the CCD Unit.
4.Replace the Relay PCB (PCB2).
5.Replace the Main Controller PCB (PCB1).
Note, not every error is simply identical. What fixes the problem one occasion might not fix it the next time. While the ideas in this piece of content derives from the service manual and generally ought to get your machine functioning, now and again other reasons might be in play.
If you’re looking at this article and have exposure to this problem and would like to share please be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the trouble then I will reply.
