Canon imageRUNNER 2545I E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E110 0002 Error Code
E110 0002
Description :
Causes :
The speed lock signal indicates a deviation 10 times in sequence at intervals of 100 msec after the signal has indicated a locked state.
* The same condition is detected after the error retry is performed.
Solutions :
1.Check the cable.
2.Replace the Laser Scanner Unit.
3.Replace the DC Controller PCB (PCB4).
Note, not every error is simply the same. What fixes the malfunction one occasion may not take care of it the next occasion. While the tips in this post comes from the service manual and generally ought to get your machine working, in some cases other things could possibly be in play.
If you’re looking at this article and have knowledge of this problem and wish to contribute be sure to leave a comment below. Or, if you have read this article and have further questions then ask. If I have exposure to the trouble then I will reply.
