Canon imageRUNNER 2545I E110 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E110 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E110 0001 Error Code
E110 0001
Description :
Causes :
The Scanner Motor (M21) speed lock signal does not indicate a locked state a specific period of time after the ScannerMotor (M21) has been started.
* The same condition is detected after the error retry is performed.
Solutions :
1.Check the cable.
2.Replace the Laser Scanner Unit.
3.Replace the DC Controller PCB (PCB4).
Note, not every error is simply the same. What fixes the situation one time may not get rid of it the next time. While the help and advice in this posting originates from the service manual and typically should get your machine up and running, in some cases other things may be in play.
If you’re looking at this blog post and have experience with this error and desire to make a contribution please be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have exposure to the trouble then I will answer.
