Canon imageRUNNER 2545I E025 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E025 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E025 0000 Error Code
E025 0000
Description :
Causes :
The Sub Hopper Toner Sensor (TS2) connection detection signal is absent for 100 msec 10 times in sequence.
* Error occurs after the delivery if a paper in passage exists.
Solutions :
1.Check connection of the Connector (J207).
2.Replace the Sub Hopper Toner Sensor (TS2).
3.Replace the DC Controller PCB (PCB4).
Note, not every error is simply the same. What remedies the situation one time might not take care of it the next occasion. While the details in this writing originates from the service manual and most often should get your machine operating, in some cases other causes might be in play.
If you’re looking at this blog post and have expertise in this problem and wish to make a contribution please leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have information about the difficulty then I will respond.
