Canon imageRUNNER 2545I E004 0000 Error Code

 

Canon imageRUNNER 2545I E004 0000 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2545I E004 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2545I E004 0000 Error Code

Service Manual Instructions for the Canon imageRUNNER 2545I E004 0000 Error Code

E004 0000
Description :

Causes :
When disconnection is detected with connector (J214) for 30 sec continuously.


Solutions :
1.Check connection of the Connector (J214).
2.Replace the Film Unit.
3.Replace the Fixing Assembly.
4.Replace the DC Controller PCB (PCB4).



Please remember, not every error is absolutely alike. What corrects the condition one occasion will possibly not eliminate it the next time. While the tips in this posting obtain from the service manual and most likely should get your machine ready to go, on occasion other factors could possibly be in play.

If you’re looking at this blog post and have exposure to this problem and desire to make a contribution please make sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the issue then I will answer back.

We will be happy to hear your thoughts

Leave a reply

Shopping cart