Canon imageRUNNER 2545I E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545I E001 0001 Error Code
E001 0001
Description :
Causes :
The hardware circuit detects overheating of the main or sub thermistor for 200 msec.
Solutions :
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Replace the DC Controller PCB (PCB4).
Please remember, not every error is absolutely alike. What fixes the problem one occasion might not fix it the next occasion. While the help and advice in this written piece derives from the service manual and usually should get your unit working, sometimes other elements could possibly be in play.
If you’re looking at this blog post and have knowledge about this error and would like to contribute please be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have experience with the trouble then I will respond.
