Canon imageRUNNER 2545 E804 0001 Error Code

 

Canon imageRUNNER 2545 E804 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2545 E804 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2545 E804 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 2545 E804 0001 Error Code

E804 0001
Description :

Causes :
When lock signal failed to be detected for 5 sec while the Power Supply Cooloing Fan (FAN6) is driven.
* The same condition is detected after the error retry is performed.

Solutions :
1.Disconnect and then connect the connector (J205) on the DC Controller PCB (PCB4).
2.Replace the Power Supply Cooloing Fan (FAN6).
3.Replace the DC Controller PCB (PCB4).




Please remember, not every error is absolutely the same. What fixes the issue one time may possibly not eliminate it the next occasion. While the tips in this post derives from the service manual and in most cases ought to get your piece of equipment operational, from time to time other things can be in play.

If you’re looking at this document and have expertise in this error and want to make a contribution make sure you leave a comment below. Or, if you have read this article and have further questions then ask. If I have experience with the issue then I will answer.

We will be happy to hear your thoughts

Leave a reply

Shopping cart