Canon imageRUNNER 2545 E804 0000 Error Code

 

Canon imageRUNNER 2545 E804 0000 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 2545 E804 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 2545 E804 0000 Error Code

Service Manual Instructions for the Canon imageRUNNER 2545 E804 0000 Error Code

E804 0000
Description :

Causes :
When lock signal is detected for 5 sec while the Power Supply Cooloing Fan (FAN6) is stopped.
* The same condition is detected after the error retry is performed.

Solutions :
1.Disconnect and then connect the connector (J205) on the DC Controller PCB (PCB4).
2.Replace the Power Supply Cooloing Fan (FAN6).
3.Replace the DC Controller PCB (PCB4).




Please remember, not every error is absolutely the same. What remedies the condition one occasion might not exactly get rid of it the next occasion. While the tips in this blog post hails from the service manual and usually should get your piece of equipment operational, at times other elements may be in play.

If you’re looking at this document and have expertise in this error and would like to make a contribution please leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the issue then I will reply.

We will be happy to hear your thoughts

Leave a reply

Shopping cart