Canon imageRUNNER 2545 E575 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E575 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 2545 E575 0002 Error Code
E575 0002
Description :
Causes :
The gripper unit does not return to the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 0.1 seconds.
Solutions :
1.Replace the Gripper Unit HP Sensor (S7).
2.Replace the Gripper Unit Move Motor (M2).
3.Replace the Finisher Controller PCB (PCB1).
Please remember, not every error is entirely identical. What remedies the trouble one occasion might not exactly solve it the next time. While the tips in this write-up is inspired by the service manual and usually ought to get your unit functioning, sometimes other reasons might be in play.
If you’re looking at this document and have knowledge about this fault and desire to share you should leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have knowledge about the issue then I will answer.
